Manualshelf

HP Integrity Virtual Server Manager 6.0 Release Notes

ManualsBrandsHP ManualsSoftwareHP Matrix Operating Environment w/Insight Control BL 24x7 Supp Flexible Lic
12345678
• Access to virtual and remote console to manage vPars.
A new Console tab has been added to the GUI to enable users determine which of the vPars
have configured a virtual iLO remote console or an iLO console.
• Support for N_Port ID Virtualization (NPIV).
The Storage tab displays the NPIV storage information for vPars.
• Support for AVIO devices.
The Storage tab displays the AVIO devices attached to the vPars.
• Virtual Server Manager menu is modified to include commands for vPars in addition to the
commands for virtual machines. The commands for vPars include commands to boot vPars,
stop vPars, restart vPars, and open a virtual iLO remote console for the vPars. For more
information on the vPars menu, see the HP Integrity Virtual Server Manager v6.0 User Guide
at http://www.hp.com/go/matrixoe/docs.
Known problems fixed in this version
The following table lists the known problems and fixes in this release of Virtual Server Manager
6.0.
Table 1 Fixes in the Integrity Virtual Server Manager v6.0 release
DescriptionDefect ID
Host information is not displayed in Create and Modify Remote Console pages.QXCR1001138289
The default option amr_enable=0 results in error on versions lower than Integrity VM v4.3.QXCR1001132795
Utilization data of VSP or vPar is wrong. -- vmmgr under SMH reports physical memory
size as 0 GB on the General tab.
QXCR1001165202
Known problems, limitations, and workarounds
This section provides a list of known problems and limitations as known to HP at time of publication.
If workarounds are available, they are included.
• Utilization data for virtual storage is not supported
In Virtual Server Manager 6.0, utilization data for virtual storage is not supported.
Severity: None
Corrective Action: None
• Suspend, Resume, and Virtual iLO Remote Console commands are not supported
If Virtual Server Manager is installed on Integrity VM 4.3 or earlier, then Suspend, Resume,
and Virtual iLO Remote Console commands are not supported. These commands are supported
only on Integrity VM v4.3 PK2 and later.
Severity: None
Corrective Action: None
• vPars are not created when using DVD storage
When the storage type used is of type DVD (directory), you cannot create vPars.
Severity: None
Corrective Action: None
6