HP Insight Management 7.0 Support Matrix

Table 66 Managed system requirements managing from an HP-UX CMS (continued)
The Utilization Provider is required on all Matrix Operating
Environment managed systems. It provides utilization data
for Virtualization Manager and Capacity Advisor.
Utilization Provider
Table 50 (page 49) lists the latest version of the Utilization
Provider provided with this release of the Matrix Operating
Environment.
The Application Discovery WBEM Provider version A.04.01
or later is required on all systems that will be managed by
Application Discovery WBEM Provider
Application Discovery. See Table 50 (page 49) for the
latest version.
The gWLM agent is required on all systems that will be
managed by gWLM
gWLM Agent
See HP Global Workload Manager User Guide for details
on the appropriate version(s) of gWLM.
HP recommends upgrading to the latest version of the
gWLM agent. See Table 50 (page 49) for the latest version.
Install this software on HP-UX managed systems even if the
system does not use nPartitions.
nPartition Provider
HP-UX 11i v1: Requires version B.12.02.07.03 or later.
HP-UX 11i v2 on HP 9000: Requires version
B.23.01.07.05 or later.
HP-UX 11i v2 on HP Integrity: Requires version
B.23.01.07.05 or later.
HP-UX 11i v3: Requires version B.31.02.01 or later.
See Table 50 (page 49) for the latest version.
VM Provider version 1.20 or later must be installed on HP
Integrity VM host systems. Earlier versions of the VM
VM Provider
Provider can be used on individual virtual machines.
Installed versions of HP Integrity Virtual Machines, VM
Provider, and VMGuestLib must be compatible. Do not mix
different versions of these components on the same system.
See Table 50 (page 49) for the latest version of the VM
Provider.
IMPORTANT: The VM Provider cannot be installed on
systems running HP-UX 11i v3 (B.11.31).
The vPar Provider that was included with the March 2006
release of HP-UX 11i v2 (B.11.23) does not work properly.
vPar Provider
With the March 2006 version installed, Systems Insight
Manager and Matrix Operating Environment do not
discover and display virtual partitions correctly. The vPar
Provider that is included with Matrix Operating Environment
fixes this problem. However, it presents the same version
number as the March 2006 version.
The same problem exists with the HP-UX 11i v1 (B.11.11)
version of the vPar Provider when used with WBEM version
A.02.00.09. This problem does not occur with the HP-UX
11i v3 (B.11.31) vPar Provider.
You can fix this problem by executing the following
command on each system where the vPar Provider has
been installed:
/opt/wbem/bin/cimmof -n root/cimv2/vpar \
/opt/vparprovider/mof/HPUX_VParLocalPartition.mof
Alternatively, on systems running HP-UX 11i v2, you can
remove the installed version of the vPar Provider and install
the version delivered with the Matrix Operating
74 HP-UX CMS requirements