HP Insight Management 7.0 Support Matrix

Table 53 Requirements and capabilities for HP ProLiant DL servers (continued)
Intelligent
Power
Discovery
Data
Center
Power
Control
Calibrated
Maximum
Power
Power
Metering
Data
Center
Thermal
Mapping
Dynamic
Power
Capping
Power
Regulator
Minimum
system BIOS
version
Minimum
iLO or OA
firmware
version
Server
model
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL380 G7
✓✓✓✓✓✓iLO 4
version 1.0
or later
ProLiant
DL380p
Gen 8
✓✓✓✓
4
2/19/2008iLO 2
version
ProLiant
DL385 G2
1.20 or
later
✓✓✓✓✓
2
✓2/19/2008iLO 2
version
ProLiant
DL385 G5
1.30 or
later
✓✓✓✓✓
2
✓2/19/2008iLO 2
version
ProLiant
DL385
G5p 1.30 or
later
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL385 G7
(AMD
Opteron
6100)
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL385 G7
(AMD
Opteron
6200)
✓✓✓✓4/16/2010iLO3 1.07
or later
ProLiant
DL580 G7
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL585 G7
(AMD
Opteron
6100)
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL585 G7
(AMD
Opteron
6200)
✓✓✓✓✓✓✓iLO 3
version 1.5
or later
ProLiant
DL980 G7
1
This server only supports power/thermal monitoring and capping with certain power supply options. See the server
QuickSpecs for detailed requirements.
2
This server only supports Power Capping. It does not support Dynamic Power Capping.
3
For Dynamic Power Capping, iLO 2 version 1.70 or later. Otherwise, iLO 2 version 1.30 or later.
4
This server model does not support HP Dynamic Power Savings mode.
60 Hardware requirements and supported capabilities for Insight Control power management