HP Insight Dynamics- VSE for ProLiant Installation and Configuration Guide

DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
NOTE: Passwords must be alphanumeric characters or - _ $ & ^ % # + = ` ~ | \ < > period and space. Do not use a space as
the last character in the account password.
If you are not installing VPM 3.0, your password can also include [ ] ( ) * ! @ ; ? and comma.
NOTE: If HP SIM is already installed, the HP Insight Software Integrated Installer reads the service and database credentials from
the previous HP SIM installation. You must upgrade using these same credentials.
Record the information so an automatic login after rebooting occurs.
Table 1-12 Automatic login after reboot
DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
A reboot might be
required after installing
or upgrading HP SIM or
Rapid Deployment Pack.
To enable an automatic
login to continue the
installation after the
reboot, provide
credentials for a one-time
login.
Yes or NoEnable automatic logonInstall or Upgrade
The password for the
current user that will be
used to logon after the
reboot.
Valid password for the
current installation user.
Logon passwordInstall or Upgrade
NOTE: Passwords must be alphanumeric characters or - _ $ & ^ % # + = ` ~ | \ < > period and space. Do not use a space as
the last character in the account password.
If you are not installing VPM 3.0, your password can also include [ ] ( ) * ! @ ; ? and comma.
Record the proxy configuration parameters in the following table.
Table 1-13 Proxy configuration parameters
DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
If your environment
requires a proxy to
access the Internet, the
installer configures your
proxy settings for the
Insight Software update
utility and Vulnerability
and Patch Management.
You can configure this
setting during or after
installation.
Whether environment
requires a proxy server
for Internet access
I use an HTTP proxy
server
Install
The hostname for proxy
server. (Software Update
and Vulnerability and
Patch Management Pack
must access the Internet
for updates.)
IP address
(###.###.###.###
where ### ranges from
0 to 255) or the name of
a valid, fully qualified
host
Proxy hostInstall
The port for proxy server.Valid port number
ranging from 0 to 65535
Proxy portInstall
If the proxy requires
authentication, select the
checkbox. Only basic
(not encrypted)
authentication is
supported.
Yes or NoMy proxy requires
authentication
Install
The username for proxy
authentication
Valid proxy usernameProxy usernameInstall
The password for proxy
authentication
Valid proxy passwordProxy passwordInstall
16 Insight Dynamics—VSE ProLiant component installation requirements