HP Insight Dynamics- VSE for ProLiant Installation and Configuration Guide
DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
The directory where you
want to install HP Insight
Software components.
Previously installed
components are
upgraded in their current
location. The installation
directory cannot be
changed for upgrades.
Any valid directory on
the installation system
(default is C:\Program
Files\HP)
Installation directoryInstall
Record existing Rapid Deployment Pack configuration parameters in the following table.
Table 1-9 Rapid Deployment Pack configuration parameters
DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
The NIC through which
images will be deployed
on the associated
network. Deployment
targets must be on the
same network.
Any detected NICRapid Deployment Pack
deployment network
interface (used for PXE)
Install (local Rapid
Deployment Pack)
The host name or IP
address of the existing
Rapid Deployment Pack
installation. This
installation must be
version 3.00 or later.
IP address
###.###.###.###,
where ### ranges from
0 to 255, or a fully
qualified host name
Existing deployment
server host name or IP
address
Reuse (remote Rapid
Deployment Pack)
The administrator
username for the existing
Rapid Deployment Pack
installation.
A valid, existing Rapid
Deployment Pack
username
Existing Rapid
Deployment Pack
username
Reuse (remote Rapid
Deployment Pack)
The administrator
password for the existing
Rapid Deployment Pack
installation.
A valid, existing Rapid
Deployment Pack
password
Existing Rapid
Deployment Pack
password
Reuse (remote Rapid
Deployment Pack)
The administrator
username for the existing
Rapid Deployment Pack
installation.
A valid, existing Rapid
Deployment Pack
username
Existing Rapid
Deployment Pack
username
Upgrade (local Rapid
Deployment Pack)
The administrator
password for the existing
Rapid Deployment Pack
installation.
A valid, existing Rapid
Deployment Pack
password
Existing Rapid
Deployment Pack
password
Upgrade (local Rapid
Deployment Pack)
NOTE: Passwords must be alphanumeric characters or - _ $ & ^ % # + = ` ~ | \ < > period and space. Do not use a space as
the last character in the account password.
If you are not installing VPM 3.0, your password can also include [ ] ( ) * ! @ ; ? and comma.
Record the HP SIM configuration parameters in the following table.
Table 1-10 HP SIM configuration parameters
DescriptionPossible valueValueParameterInstall, Reuse, Upgrade
The username for the
administrator performing
the installation. This
administrator has full
control of the HP SIM
installation.
A valid, existing
username with
administrative privileges.
When HP SIM is being
reused or upgraded, the
username field is
automatically populated
with the username in use
by HP SIM and cannot
be changed.
Installing usernameInstall
The password for the HP
SIM administrator
performing the
installation.
A valid password for the
username.
Installing passwordInstall
14 Insight DynamicsāVSE ProLiant component installation requirements