HP Matrix Operating Environment 7.3 Release Notes

Suggested action
At the Integrity Virtual Machine EFI prompt, execute the following commands to see LUN mappings.
When these steps are complete, the user can select the required LUN from the displayed device
list to boot up or to install the operating system.
1. Check configurable controllers using the drvcfg command.
Shell> drvcfg
Configurable Components
Drv[2C] Ctrl[29] Lang[eng]
2. Enumerate all SCSI and FC LUNs using drvcfg -s <drvnum> <ctrlnum>. drvnum and
ctrlnum are displayed as part of Step 1. Press Y for confirmation on enumerating both SCSI
and FC LUNs.
Shell> drvcfg -s 2C 29
Set Configuration Options
Drv[2C] Ctrl[29] Lang[eng]
HP AVIO Stor Driver Configuration
==================================
Warning: Enumerating all SCSI or FC LUNs increases initialization times.
Enumerate all SCSI LUNs (Y/N)? [current setting: Y]: Y
Enumerate all FC LUNs (Y/N)? [current setting: Y]: Y
Drv[2C] Ctrl[29] Lang[eng] - Options set. Action Required is None
3. Reconnect drivers, refresh mapped drives and display available boot options using commands
"reconnect -r" and "map -r"
Shell> map -r
Device mapping table
blk0 : Acpi(PNP0A03,0)/Pci(1|0)/Fibre(WWN50001FE1501A1F39,Lun4068000000000000)
blk1 : Acpi(PNP0A03,0)/Pci(1|0)/Fibre(WWN50001FE1501A1F3D,Lun4068000000000000)
Moving a managed virtual machine guest using Microsoft SCVMM may change BIOS
serial number of logical server
On rare occasions, the BIOS serial number of a VM guest managed by logical server management
is changed if a file copy move operation is performed on the VM guest using Microsoft System
Center Virtual Machine Manager (SCVMM). This may cause operations on the virtual machine
logical server to be unsuccessful, or the virtual machine logical server may become inoperable.
Suggested action
Unmanage the logical server using the Matrix OE visualization Delete→Unmanage Logical Server...
menu selection, then import the virtual machine as a logical server using Tools→Logical
Servers→Import....
Viewing or editing the logical server management properties file may cause failure of the
HP Logical Server Automation service
Viewing or editing the C:\Program Files\HP\Virtual Server Environment\conf\
lsa\lsa.properties file may write lock the file while the HP Logical Server Automation service
is running. This may cause a serious failure of the service.
Suggested action
Use a text editor that does not lock the file, such as Emacs, Notepad, or TextPad.
Matrix recovery management
Limitations
Using Matrix recovery management to DR protect IO services
When you use Matrix recovery management to DR protect IO services deployed from an IO template
using an IC virt or VM template, the template may only contain a single disk.
42 Issues and suggested actions