HP Matrix Operating Environment 7.1 Installation and Configuration Guide for Provisioning with Virtual Resources

If you originally connected to the CMS using Microsoft Remote Desktop Connection, remember
to reconnect using the mstsc /console or /admin switch (depending on your client version).
24. After installation is complete, review the Installation status screen to verify that all components
were installed successfully. If there were errors, go to “Installation errors” (page 37).
25. Click Next to bring up the Installation finished screen to confirm that all components were
installed successfully.
Click Close to exit the Insight Management Installer. The Insight Management software
installation is complete.
36 Installing Insight Management software on the CMS