HP Integrity Virtual Server Manager 6.0 User Guide

1
The “VSP General tab” (page 22) displays information about the VSP system.
2
The “VSP Virtual Servers tab” (page 24) displays information about the state of virtual partitions
and virtual machines in the VSP system.
3
The “VSP Virtual Switches tab” (page 26) shows information about the virtual switches on the
VSP.
4
The “VSP Network tab” (page 28) shows all mappings from virtual network interface cards
in the virtual partitions to the physical network interface cards in the VSP system.
5
The “VSP Storage tab” (page 35) shows all mappings from the virtual storage devices in the
virtual partitions to the physical storage devices in the VSP system.
6
The “VSP Console tab” (page 42) displays the screen through which you can open a iLO
console terminal or a virtual iLO remote console terminal based on your privileges.
7
The “VSP GUID Resources tab” (page 42) displays the screen through which you can create,
modify, or delete World Wide Number (WWN) ranges.
VSP General tab
The VSP General tab displays information about the overall state and configuration of the VSP
system.
Quick reference
Figure 7 VSP General tab
1
Displays this window in a format suitable for printing.
2
Describes resources in the VSP system.
3
Describes the status of virtual partitions and virtual machines in the VSP system and identifies
external managers. If the VSP virtual partitions and virtual machines are being managed by
gWLM or HP Serviceguide, the External Managers field displays gWLM or Serviceguide.
If the virtual partitions are managed by gWLM, the field provides a hyperlink that enables
you to access gWLM.
4
Summarizes resource utilization for the VSP system.
For more information about using Virtual Server Manager to collect and view utilization data,
see Chapter 8 (page 113).
5
Summarizes version information of virtual server manager.
22 Using Virtual Server Manager views and tabs