HP Matrix Operating Environment 7.3 Release Notes

NOTE: The hpio.properties resides under IOinstalledDir/conf.
The lsa.properties resides under VSEinstalledDir/conf/lsa.
Suggested action
1. Measure the time required for the power cycle of the Integrity blade being provisioned.
NOTE: The time varies based on the blade model, its memory size, and the number of
QLogic cards. You can measure the power cycle time from the Integrity blade remote console
using Onboard Administrator (OA) or VCEM.
2. Set the serverboot.physical.wait.seconds and INTEGRITY_POWERON_WAITTIME
according to the time measured in step 1.
Use the following parameters as a minimum.
• For BL870c i2 and i4 blades:
Set the serverboot.physical.wait.seconds to 540 seconds.◦
◦ Set the INTEGRITY_POWERON_WAITTIME to 540000 milliseconds.
• For BL890c i2 and i4 blades
◦ Set the serverboot.physical.wait.seconds to 1080 seconds.
◦ Set the INTEGRITY_POWERON_WAITTIME to 1080000 milliseconds.
54 Issues and suggested actions