HP Matrix Operating Environment 7.3 Release Notes

1. Edit the install.cmd file, found under the <Insight Software installation>\rdp\
deployment server\hpfeatures\hpagents-ws\components folder.
2. Remove the following two lines:
call :installsc wbem%PROCESSOR_ARCHITECTURE%
if %cpresult% geq 1 set /a cpresults=cpresults+1
Provisioning a service may fail when storage volumes in a logical server group contain
different tags
In an IO template, different storage tags can be assigned to the individual volumes in a logical
server group. When storage is auto-generated, each volume is provisioned based on a number
of defined requirements, including these tags. Within a logical server group, if the private data
disk(s) contain different tags than the boot disk, the service will fail to provision.
Suggested action
Use the same storage tags for the boot disk and private data disks in a logical server group. If
separate tags are needed, separate storage pool entries can be manually defined for the boot
disk and private data disks with those separate tags.
Storage auto provisioning does not select a preconfigured data disk if the storage pool
entry does not contain a boot disk
During storage provisioning, if a storage pool entry contains a volume that matches the requirements
of an infrastructure orchestration service, the matching volume is used for the service.
If the IO template contains a boot disk and a data disk, and the storage pool entry contains only
a boot disk, the boot disk is used and the data disk is automatically created. However, if the storage
pool entry contains only a data disk, the volume is not used. Both the boot and data disk will be
created.
Suggested action
Add a boot disk to the storage pool entry containing the desired data disk, or allow both disks to
be automatically created.
Provisioning errors on Hyper-V cluster after CSV disk failure
If a cluster shared volume (CSV) is in a failed state (for example, if LUNs are not available or in a
read-only state), Insight Control virtual machine management cannot obtain any information about
the CSV. Subsequently, operations on the Hyper-V cluster (including provisioning) will fail, or all
VM hosts in the cluster will be excluded from operations.
Suggested action
1. Remove the failed CSV from the Hyper-V cluster and correct the issue that caused the failure.
2. Bring the CSV back online.
3. Manually refresh server resources in Matrix OE visualization by selecting Tools→Logical
Servers→Refresh....
4. Retry the operation.
NIC is not configured properly on a new VM after a successful Linux guest deployment in
an ESX/ESXi/vSphere environment
Networking may not work on a provisioned Linux VM on an ESX/ESXi/vSphere host due to a
known VMware issue that impacts all versions of Linux in an ESX/ESXi/vSphere environment.
Suggested action
For information about how to reconfigure your network on the provisioned VM, see http://
kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&
externalId=2002767.
Infrastructure orchestration 29