HP Integrity Virtual Server Manager 6.0 User Guide

not yet active), or In EFI (indicating that the virtual machine is in the firmware interface and
an OS has not yet been booted). If the virtual machine is migrating an icon indicates the
direction of migration ( indicates migration to another host; indicates migration from
another host). If the virtual machine is waiting to migrate (when multiple virtual machines are
selected to migrate, only one is migrated at a time), an hourglass icon ( ) indicates so; to
view changes in migration status, click Refresh Data. For a description of the status, position
the cursor over the icon.
• Boot Attribute: Indicates the hardware startup attribute for a virtual machine, which determines
its startup behavior (that is, whether the virtual machine is started automatically when the
virtual machine boots or whether it must be manually started). To use VM Manager to modify
this attribute, click Modify→ Virtual Machine Hardware Auto Start.
• Graceful Stop Timeout: If supported by the version of Integrity VM running on the VM Host,
this specifies the amount of time HP Integrity VM waits for I/O activity to complete before
stopping a virtual machine. The timeout value is set at the VM Host command line by using
the hpvmmodify command.
• Online Migration Enabled: Indicates whether the virtual machine is enabled for online migration
or whether the VM Host is not licensed to support online migration. The VM Host administrator
can enable a virtual machine by using the hpvmmodify command at the VM Host. The
following table shows in the third column what the status field displays, based on the state of
the VM Host and virtual machine listed in the first and second column, respectively:
Table 4 Online migration status
Online migration statusVirtual machine stateVM Host state
Host disabledEnabled or disabledDisabled
Host not licensedEnabled or disabledUnlicensed
VM enabledEnabledEnabled and licensed
VM disabledDisabledEnabled and licensed
• Not Runnable Set By: Displayed when the virtual machine has migrated to another VM Host,
indicates the activity or agent that caused the virtual machine hardware status to be Not
Runnable. For example, Migrate indicates the Not Runnable state was initiated by migration
(hpvmmigrate); Admin indicates the VM was marked Not Runnable by the hpvmmodify
command.
• Not Runnable Reason: Displayed when the virtual machine has migrated to another VM Host,
indicates the reason the virtual machine hardware status is Not Runnable. For example, the
guest has migrated to another VM Host.
Online Migration Phases
The VM Properties General tab displays the Online Migration Phases section when online migration
is in progress. An example is shown in Figure 31.
NOTE: If you access the VM Properties General tab immediately after initiating a migration, the
Online Migration Phases section might not be displayed. To view this data, click Refresh Data.
48 Using Virtual Server Manager views and tabs