HP Integrity Virtual Machines Manager Version 4.0 Getting Started Guide

Table 3-4 VM Manager Modify Menu Options (continued)
Action SummaryMenu Selection
Modifies the number of virtual CPUs allotted to a virtual
machine that has been configured for symmetric
multiprocessing. The changed value takes effect when
the virtual machine is restarted.
Modify→Virtual Machine CPU Count...
Modifies the VLAN assignments of virtual switch ports
connected to the virtual machine.
Modify→Virtual Machine VLAN Settings...
Modifies the startup attribute (autoboot) of a selected
virtual machine. You can allow the virtual machine to be
started automatically when the VM Host is started, or
you can set the attribute so that you can start the virtual
machine manually.
Modify→Virtual Machine Hardware Auto Start...
Adds a virtual storage device to a virtual machine, where
the virtual storage device is backed by physical storage
and connected to a virtual storage adapter on the VM
Host.
Modify→Add Storage Device to Virtual Machine...
Adds a network device to a virtual machine, where the
network device is associated with a virtual switch. Allows
you to create a new virtual switch.
Modify→Add Network Device to Virtual Machine...
Sets and changes WBEM credentials for virtual machines.
For information, see “Setting WBEM Credentials in HP
SMH” (page 20). This menu option is available only when
using VM Manager with HP SMH.
Modify→WBEM Credentials...
Using VM Manager Menus 63