HP Insight Dynamics- VSE for ProLiant Installation and Configuration Guide

administrative rights or the administrator template in the previous step, this option is automatically
selected.
9. Under the Sign-In IP Address Restrictions section, in the Inclusion ranges field, enter the IP addresses
of the systems you want this user to be able to use as a client browsing this CMS. If you list multiple IP
addresses, separate them with a semicolon (;). Each range is a single IP address or two IP addresses
separated by a dash (-). The IP addresses must be entered in the standard dotted decimal notation, for
example, 15.1.54.133. Any spaces surrounding the semicolons or dashes are ignored. Spaces are
not allowed within a single IP address in the dotted decimal notation. Enter 0.0.0.0 to prevent a user
from logging in through a remote system.
Important: If browsing from the CMS, ensure all IP addresses of the CMS are properly included. If
browsing to localhost, ensure the loopback address 127.0.0.1 is also included.
10. In the Exclusion ranges field, enter the IP address of the systems that should be excluded from
management by this user or user group. Use the same format as in the previous step for Inclusion
ranges. Enter 0.0.0.0 to prevent a user from logging in through a remote system.
Note: Ensure that your inclusion and exclusion ranges do not overlap.
Note: The following five steps are only for a CMS running Windows.
11. Under the Pager Information section, in the Phone number field, enter the pager phone number of
the user associated with this user account if you are using a Windows operating system. If the Phone
number field is left blank, the paging information is not saved. This field does not apply to user groups.
12. In the PIN number field, enter the PIN number associated with the pager phone number. This field does
not apply to user groups.
13. In the Message length field, select how many characters can be accepted in the paging message from
the dropdown list. This field does not apply to user groups.
14. In the Baud rate field, select the appropriate baud rate for the pager from the dropdown list. This field
does not apply to user groups.
15. In the Data format field, select the appropriate data format for the pager from the dropdown list. This
field does not apply to user groups.
16. To save and close the New User section, click OK. The new user account is created. To save and keep
the New User section open, click Apply, or to cancel the creation of this user, click Cancel.
Editing users
1. Select a user and click Edit. The Edit User section appears.
2. Make changes to the user information, and then click OK.
See HP Systems Insight Manager 5.3 Technical Reference Guide at http://h18013.www1.hp.com/
products/servers/management/hpsim/infolibrary.html for more information.
Deleting users
1. Select a user and click Delete. HP SIM prompts you to confirm the deletion.
2. Click OK.
Configuring e-mail settings
1. Access the SMTP host and CMS e-mail settings through the First Time Wizard or choose
Options→Events→A utomatic Event Handling→Email Settings. The Email Settings page appears.
2. Enter the SMTP host name. The SMTP host is the outgoing e-mail server that the CMS uses to send e-mail
notifications.
3. In the Sender's e-mail address box, enter the e-mail address that the management server uses when
sending e-mail notifications.
4. (Optional) Select Send test email and enter recipients e-mail address.
Click Send test email now.
5. To authenticate your SMTP server, select Server Requires Authentication.
6. Enter the account user name and password in the corresponding boxes.
Note If you did not enter a valid SMTP host, HP SIM notifies you that it cannot send e-mail notifications.
34 Performing an installation