HP Insight Dynamics- VSE for ProLiant Installation and Configuration Guide

4. Resolve any remaining issues, or click Close to exit Insight Software Advisor.
After you close HP Insight Software Advisor, the Welcome to the HP Insight Software DVD screen
reappears.
5. On the Welcome to the HP Insight Software DVD screen, click Review Installation Checklist. A
PDF of the HP Insight Software Installation Checklist appears. You must identify the configuration
parameters or configure the settings as listed in the checklist.
6. On the Welcome to the HP Insight Software DVD screen, click Run Integrated Installer. The
Welcome to the HP Insight Software Installer screen appears.
7. Choose either of the following options:
• To install by management suite, select Management Suite, click Next, and then go to step 7.
• To install by customized product list, select Customized List, click Next, and then go to step 8.
• To install HP Virtual Connect Enterprise Manager (VCEM) in standalone mode or to upgrade a
VCEM 1.10 or 1.10 SP1 install to 1.20 standalone mode, select HP Virtual Connect Enterprise
Manager (Standalone mode), click Next, and then go to step 11. A standalone installation does
not support installation of other HP SIM related plug-in tools.
8. When installing by management suite, the Select installation by management suite screen appears.
Depending on the products to be installed, the integrated installer:
• Automatically selects the appropriate products to be either installed or upgraded.
• Automatically prevents products not relevant to your installation from being installed or upgraded.
• Enables you to select or deselect other products for installation or upgrade.
Previously installed suites are upgraded to the revisions provided. Suites have expandable lists that
enable you to view the list of components. You can customize the default suite selections in the following
step.
9. When installing by customized product list or continuing with a management suite installation, the
Select components for install or upgrade screen appears.
Depending on the products to be installed, the integrated installer:
• Automatically selects the appropriate products to be either installed or upgraded.
• Automatically prevents products not relevant to your installation from being installed or upgraded.
• Enables you to select or deselect other products for installation or upgrade.
Select the corresponding checkboxes of components to install, and then click Next. Components have
expandable lists that enable you to view their descriptions. If components are the current version or can
be upgraded, the installer detects and then uses or upgrades them. Checkboxes for required components
and previously installed components cannot be cleared.
NOTE: If you deselect an optional component for either HP Insight Dynamics or HP Insight Orchestration
that would optimize performance, a warning message appears.
10. The Insight Software DVD #2 Selection screen appears when you are installing or upgrading
components or suites that reside on DVD #2. You are not required to use DVD #2 unless you are installing
software on this DVD. The items to be installed from DVD #2 appear onscreen.
NOTE: All DVDs used must be from the current release.
• To manually replace DVD #1 with DVD #2 when prompted, select Replace DVD #1 by DVD #2
in the drive during the installation process, and then click Next.
• The installer can also automatically access each DVD as needed if multiple DVD sources exist. To
use this option, enter the location of DVD #2 in the Specify an alternate drive for DVD #2 box,
or click Browse to search for the DVD. Click Next.
22 Performing an installation