HP Insight Dynamics- VSE for ProLiant Installation and Configuration Guide

1 Insight Dynamics—VSE ProLiant component installation
requirements
This chapter describes the requirements for Insight Dynamics—VSE ProLiant component installation.
Hardware requirements
The following table lists the Insight Software CMS hardware installation requirements.
Table 1-1 Hardware requirements
SpecificationComponent
HP ProLiant BladeSystem c-Class or p-Class server blades, or HP ProLiant ML or DL 300, 500, and 700 G3 or higher
recommended
Server
At least 2 GB RAM (3 GB RAM recommended). If you are installing HP Insight Dynamics – VSE, 4 - 6 GB is
recommended.
1
Memory
At least 1.6 GHz (2 GHz or faster recommended)
2
Processor
At least 10 GB for HP Insight Software. More space is needed for storing deployment operating systems (for HP Rapid
Deployment Pack) and patches (for Vulnerability and Patch Management Pack).
3
Disk space
New Technology File System (NTFS)File
structure
Local or mapped DVD drive requiredDVD drive
1 Construction of a system meeting the minimum memory requirements for Virtual Server Environment (VSE) operation is problematic
on 32-bit versions of the Windows Server family due to the maximum addressable memory space of a 32-bit operating system of
4 GB. This memory space is also shared by some hardware elements, such as video memory, reducing the maximum available
memory below the minimum recommended by HP. To overcome this limitation, the /PAE switch can be added to the boot.ini file
to enable the Physical Address Extension feature. This allows access to memory above 4 GB on 32-bit operating system editions
running on hardware that supports PAE.
2 For HP Insight Dynamics – VSE, 2 or more processing cores are required.
3 For information about HP Insight Dynamics requirements, see the HP Insight Dynamics - VSE and HP VSE Management Software
Version 4.1 Support Matrix or HP Insight Dynamics - VSE & VSE Management Software Version 4.1 Getting Started Guide .
Software requirements
The following naming conventions are used in Table 1-3 “ HP Insight Software CMS requirements”.
Table 1-2 Operating system naming convention
Operating SystemTerm
Microsoft Windows Server® 2008, Standard and Enterprise Edition 32-bit
Windows Server 2008 (32-bit)
Microsoft Windows Server 2008, Standard and Enterprise Edition 64-bit (in 32-bit emulation mode)
1
Windows Server 2008 (64-bit)
Windows Server 2003, Standard and Enterprise Edition SP2 (32-bit)Windows Server 2003
Windows Server 2003 R2, Standard and Enterprise Edition SP2 (32-bit)Windows Server 2003 R2
1 HP ID – VSE, VCEM, HP IO, and HP IR do not support CMS installation to 64-bit Windows Server 2008. For more information,
see the component's support matrix.
Table 1-3 HP Insight Software CMS requirements
Windows Server 2003 R2Windows Server 2003Windows Server 2008
Specification 64-bit32-bit64-bit32-bit64-bit32-bit
✓✓✓✓.NET 1.1 Framework
1
✓✓✓✓.NET 2.0 Framework
✓✓✓✓.NET 3.0 Framework
2
Hardware requirements 11