HP Insight Dynamics 6.3 Release Notes

Minor issues
Capacity reporting for 3PAR storage systems
There is a discrepancy between volume capacity reported by 3PAR user interfaces and SPM. SPM
reports GB (1 GB=1,000,000,000 bytes) and 3PAR reports GiB (1GiB=2^30=1,073,741,824
bytes).
Insight Managed System Setup Wizard
Limitations
Privilege elevation configuration that requires a password by the privilege elevation tool is not
supported
Insight managed system setup wizard supports privilege elevation only on a CMS that has privilege
elevation configured so that no password is required by the privilege elevation tool (such as su
and sudo). If you attempt to configure features when privilege elevation is turned on and requires
a password, you may see failures in the wizard's execution output.
Suggested action
If a feature fails to configure correctly because of privilege elevation password requirements,
configure the feature outside of the managed system setup wizard.
To turn off the requirement for a password, use the Systems Insight Manager
Options→Security→Privilege Elevation menu, and uncheck the check box labeled “A password
is required for this privilege elevation tool.” Note that systems managed by the CMS must be
reconfigured to reflect this configuration change.
Patch required to register Integrity VM hosts running Integrity VM 4.1 or higher and 11.31 HA-OE
or DC-OE
The Insight managed system setup wizard fails to register Integrity VM hosts running Integrity VM
4.1 or higher and either the 11.31 High Availability Operating Environment (HA-OE) or the 11.31
Data Center Operating Environment (DC-OE).
Suggested action
Apply the patch PHSS_40784 to the HP-UX 11i v3 Integrity VM host. The patch is needed on
systems where Serviceguard is installed, but the systems are not actively in a Serviceguard cluster.
Serviceguard is included with the HP-UX 11i v3 HA-OE and DC-OE. You can download this patch
from http://www.hp.com/go/hpsc. Select Patch management from the Download options menu
and search for the patch.
HP Integrated Lights-Out 3 (iLO3) support
HP Integrated Lights-Out 3 (iLO3) is supported in the current release of Insight managed system
setup wizard. However, iLO3 for ProLiant requires firmware version 1.05.
Suggested action
Update iLO3 ProLiant firmware to version 1.05.
HP Integrity rx2620 is not supported
In this release, using the Insight managed system setup wizard to configure an HP Integrity rx2620
server is not supported.
Suggested action
Manually configure HP Integrity rx2620 servers.
28 Issues and suggested actions