HP-UX Virtual Partitions 6.0 Administrator Guide

operation might not be successful. When vparreset -g does not succeed, consider the following
additional operations:
• Use the vparreset -t command if you want to initiate a transfer of control operation. This
option restarts the vPar. Also, a dump of the OS is collected if there is sufficient space. The
dump information can later be used to troubleshoot the unresponsiveness of the vPar.
• Use the vparreset -h command to hard reset the vPar. This option restarts the vPar without
collecting an OS dump.
• Use the vparreset -d command to power down the vPar. This option does not restart the
vPar.
Recovering a nonresponsive vPar 47