HP-UX Virtual Partitions 6.0 Administrator Guide

vparconsole
The vparconsole command allows you to connect to the virtual console of a virtual partition.
Table 14 (page 31) describes the options you can use with the vparconsole command.
Table 14 Options with the vparconsole command.
DescriptionOption
Specifies the number or name of the virtual partition to be booted.-p vpar_id
Provides a console command to be performed before reading from standard
input. The -c option is provided for scripting and logging purposes. You
-c command
can enter multiple -c options; they are processed from left to right. In this
mode, you cannot use Ctrl/B to get back to command mode.
Overrides the standard Ctrl/B escape (or attention) character.-e echar
Continues following the console output after reaching EOF on standard input.
This option is for scripting and logging purposes.
-f
Interacts with the console (reads from standard input), despite the use of the
-c and -f options.
-i
Makes scripted operations less verbose.-q
For examples, see the vparconsole3(1) manpage.
VSP commands 31