HP Integrity Virtual Machines Manager Version 4.0 Getting Started Guide

Vswitch Properties General Tab
The Vswitch Properties General tab shows the status, configuration properties, and port
assignments of a virtual switch, as shown in Figure 3-19.
Figure 3-19 Vswitch Properties General Tab
The following provides general information about the screen. For more detailed information,
see Table 3-1.
1
Goes back to the previous view, in this case the VM Manager VM Host view. When you
access the Vswitch Properties view from another VM Manager view (such as the VM Host
view), the link returns you to that previous VM Manager view.
2
Displays this window in a format suitable for printing.
3
Displays virtual switch configuration information.
4
Updates the data displayed on this page. In general, VM Manager tabbed view screens are
refreshed automatically at regular intervals, and VM Manager screens that display
configuration data are updated instantaneously when you use VM Manager to change the
related configuration parameters. However, when changes to the virtual machine I/O
configuration are made using tools other than VM Manager (such as adding or removing
I/O devices by using the VM Host command line), the updated configuration data is not
shown until the screen is refreshed.
Table 3-1 describes the data displayed by the Vswitch Properties General tab.
54 Using VM Manager