HP Insight Management 7.0 Support Matrix

Table 56 Requirements and capabilities for HP Integrity servers
Intelligent
Power
Discovery
Data
Center
Power
Control
Calibrated
Maximum
Power
Power
Metering
Data
Center
Thermal
Mapping
Dynamic
Power
Capping
Power
Regulator
Minimum
system BIOS
version
Minimum
iLO or OA
firmware
version
Server
model
✓✓✓✓
1
N/AiLO 2
version T
Integrity
BL860c
02.05 or
later
✓
3
✓✓✓✓
2
✓
2
NoneNoneIntegrity
BL860c i2
✓✓✓✓
1
N/AiLO 2
version T
Integrity
BL870c
02.05 or
later
✓
3
✓✓✓✓
2
✓
2
NoneNoneIntegrity
BL870c i2
✓
3
✓✓✓✓
2
✓
2
NoneNoneIntegrity
BL890c i2
✓✓✓✓
1
N/AiLO 2
version F
Integrity
rx2660
02.05 or
later
✓
3
✓✓✓✓
2
✓
2
NoneNoneIntegrity
rx2800 i2
✓✓✓✓
1
N/AiLO 2
version F
Integrity
rx3600
02.05 or
later
✓✓✓✓
1
N/AiLO 2
version F
Integrity
rx6600
02.05 or
later
✓
4
✓✓✓✓Integrity
Superdome
2
1
HP Power Regulator for Integrity servers require Dual-Core Intel Itanium Processor 9100 series dual-core 1.6 GHz 18/24
MB parts. It also requires HP-UX 11.31 with patches PHKL 36654 PHKL 37031, PHKL 37032, PHKL 36477, PHKL
36478 or Microsoft Windows Server 2008 with the "HP platform-controlled Power management" driver (other operating
systems to be announced). If Microsoft Windows Server 2008 was factory installed by HP, then the driver is already
installed. If you have installed Microsoft Windows Server 2008, then you need to obtain HP's Smart Setup CD and
manually install this Smart Component. The Smart Setup CD is available as part of the HP Integrity Essentials Foundation
Pack for Microsoft Windows (T2369AA) or is available from http://www.hp.com under "Software and Driver downloads"
for your platform.
2
Requires iLO firmware version 01.40.42 or later
3
The Power ON/OFF action of the Data Center Power Control (DCPC) capability of power management is not supported
for this server.
4
Supported for nPar only.
62 Hardware requirements and supported capabilities for Insight Control power management