HP CloudSystem Matrix How-To Guide: ESXi Cluster Provisioning

5
b. Click Save.
Select the IO network and click Edit Network.
a. Specify the network address/netmask, usable IP address space, DNS, and any other optional values.
b. Enter the VLAN ID (2000, 2042, 2309, 2740, or 2936).
c. Click the Trunk tab.
d. Select the Trunk network (indicating that the Trunk network carries this network).
e. Click Save.
In this example, IO is expected to satisfy the Trunk network, defined in an IO service template, by attaching a Virtual
Connect VLAN tunnel trunk that carries those networks to the Virtual Connect profile network port. IO can also satisfy
the Trunk network, defined in an IO service template, by aggregating the desired networks onto a Virtual Connect
profile multinetwork port. When all desired networks are defined in the Virtual Connect domain group, IO will