HP Integrity Virtual Server Manager 6.0 User Guide

1. Click the Virtual Partitions tab.
The virtual partitions are listed in this tab.
2. Select one or more virtual partitions by selecting the checkbox against each required virtual
partition.
3. Select Tools→Reset Virtual Partition from the Virtual Partitions menu bar.
The Reset Virtual Partition screen is displayed.
Figure 61 Reset virtual partitions
The General Preview area shows the virtual partitions that are going to be reset. The Real
Command area displays the commands that the virtual partition Manager will execute to reset
the selected virtual partitions.
4. Select the How to reset option to set the reset method. The following reset options are available:
• TOC reset: The Transfer of Control (TOC) reset using the -t option does a soft reset of
the selected virtual partition. The -t option is the default operation of the vparreset
command. For a proper shutdown of the virtual partition, use the -h option.
• Hard reset: The hard reset or the -h option performs a hard reset of the selected virtual
partition. The -h option is equivalent to the RS command in the management processor.
5. Click OK to reset the selected virtual partitions.
Opening iLO console
The virtual console is a terminal from which you can manage all the virtual partitions within VSP.
To start the virtual console terminal of a virtual partition:
1. Click the Virtual Servers tab.
The virtual partitions and virtual machines are listed in this tab.
2. Select one or more virtual partitions or virtual machines by selecting the checkbox against
each required virtual partition or virtual machine.
Opening iLO console 105