HP Insight Recovery Technical White Paper

15
As shown in Figure 9, the
admin
is prompted for a location to save the configuration file.
At the
Recovery S
ite
•
The
admin imports
the
Insight Recovery
configuration at
the
recovery site
.
•
T
he configuration file exported at the
pri
mary site
in the previous
step is transferred
to the
recovery site
, and
then
is
imported at
the
recovery site
us
ing the Import command (by
invoking
the Sites

Configure

Import button
)
.
During the import phase, the admin
decides which
logical server
s at
the
recovery site
correspond to the
DR
-
protected
logical
server
s at the
primary site
. These are known as
r
ecovery
logical server
s
.
•
During the import process, for each imported Recovery Group, the
admin
is asked to
specify which r
ecovery
logical server
corresponds to the
logical server
in the
configuration just imported from the
primary site
. If the corresponding
logical server
names at both sites are identical, the matching is done automatically during the Import
process. If the corresponding
logical
server
names are not identical, the
admin
can
choose the r
ecovery
logical server
that corresponds to the
logical server
in the Recovery
Group just imported.
The final confirmation screen of the import process is illustrated in
Figure 10
.
Figure 10:
Final
confirmation screen in the Import
procedure of
Insight Recovery
c
onfiguration
As shown in Figure 10,
in
the
last step of the
Import process, the
admin
is presented with a final
confirmation screen to show the result of the I
mport process which should be checked before
proceeding.
Sites Information
Storage
Information
Recovery Group In
formation