HP Insight Management 7.3 Update 1 Support Matrix

Table 57 Requirements and capabilities for HP ProLiant DL servers (continued)
Intelligent
Power
Discovery
3
Data
Center
Power
Control
1, 2
Calibrated
Maximum
Power
Power
Metering
Data
Center
Thermal
Mapping
Dynamic
Power
Capping
Power
Regulator
Minimum
system BIOS
version
Minimum
iLO
firmware
version
Server
model
✓✓✓✓✓
5
✓2/19/2008iLO 2
version 1.30
or later
ProLiant
DL385 G5
✓✓✓✓✓
5
✓2/19/2008iLO 2
version 1.30
or later
ProLiant
DL385 G5p
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL385 G7
(AMD
Opteron
6100)
✓✓✓✓✓✓✓4/1/2010iLO 3
version 1.0
or later
ProLiant
DL385 G7
(AMD
Opteron
6200)
✓✓✓✓✓✓✓iLO 4
version 1.01
or later
ProLiant
DL385p
Gen8
✓✓✓✓✓✓✓P77
03/29/2012
iLO 4
version 1.10
or later
ProLiant
DL560
Gen8
✓✓✓✓A16
4/16/2010
iLO 3
version 1.07
or later
ProLiant
DL580 G7
✓✓✓✓✓✓✓P79
11/01/2013
iLO 4
version 1.40
ProLiant
DL580
Gen8
8
✓✓✓✓✓✓✓A16
4/1/2010
iLO 3
version 1.0
or later
ProLiant
DL585 G7
(AMD
Opteron
6100)
✓✓✓✓✓✓✓A16
4/1/2010
iLO 3
version 1.0
or later
ProLiant
DL585 G7
(AMD
Opteron
6200)
✓✓✓✓✓✓✓A16
6/12/2012
iLO 3
version 1.50
or later
ProLiant
DL585 G7
(AMD
Opteron
6300)
✓✓✓✓✓✓✓iLO 3
version 1.50
or later
ProLiant
DL980 G7
1
Data Center Power Control works only on Primary Addresses of a system and cannot detect a system with a non-primary address.
If a system has IPv4 as a primary address and IPv6 as a non-primary address, Data Center Power Control only works with the IPv4
address.
2
For VMhost with only an IPv6 address. Data Center Power Control cannot perform a graceful shutdown of guests. It will only
shutdown the hosts.
76 Hardware requirements and supported capabilities for Insight Control power management