HP Insight Dynamics - VSE 6.0 Integrity CMS Installation and Configuration Guide

d. Reinitialize HP SIM by entering the following command on the CMS:

# mxinitconfig -a

3. Configure ID-VSE for Integrity by entering the following command:

# /opt/vse/bin/vseinitconfig -a

The vseinitconfig command logs status, errors, and exceptions to the file /var/opt/

vse/logs/vseinitconfig.log. Review the output of this command to ensure there are

no errors.

IMPORTANT: If you are upgrading from a previous version of ID-VSE for Integrity, the

vseinitconfig command migrates any product licenses that were previously installed

or scanned to the HP SIM License Manager database. Review the licensing information in

the log file to make sure that it is correct. You may need to adjust the number of licensed

cores using the vselicense command. For more information about migrating previous

licenses to the new license model, see vselicense(1M) and the HP Insight Dynamics 6.0 Getting

Started Guide.

4. When vseinitconfig finishes, you are prompted to restart HP SIM. Type “y” and press

Enter to restart HP SIM.

5. (Optional) Execute the command catman to make sure that the ID-VSE for Integrity

manpages can be listed by keyword using man -k.

Procedure 3-6 Install ID-VSE for Integrity using existing installation of HP SIM

1. Enter the following command on the CMS:

# /usr/sbin/swinstall -x autoreboot=true \

-s path-to-depot-file VSEMgmt

2. Configure ID-VSE for Integrity by entering the following command: