Server Management - Reference Guide

Chapter 2 Server Management Tools Installation
10
LXr Series Servers to be Managed Install/Configure:
SNMP Service (NT and 2000 servers only)
Software: Microsoft Windows CD.
Netserver Agents (includes Instant TopTools) **
Software: HP Netserver Navigator CD under
\Manage\Server or HP website at www.hp.com/toptools.
Documentation: Online guide available on the HP
Netserver Documentation CD (or refer to HP TopTools
Auto Alert documentation).
HP TopTools Remote Control Card accessory (Not
applicable to pre-LXr 8000 systems.)
Software: On Navigator CD with accessory.
Documentation: With the accessory, or see the online guide
available on the Netserver Documentation CD.
OpenView ManageX Event Manager
Software and online documentation: HP Netserver
Navigator CD under \Manage\Console\ManageX.
* For information on integrating HP TopTools with management platforms such as HP OpenView
Network Node Manager, CA Unicenter TNG, and Tivoli Enterprise Management and NetView, see the
HP website at www.hp.com/go/netserver_mgmt.
** Netserver Agents and Instant TopTools can be installed either at each server, or pushed over the
network from a network client. Instant TopTools does not need Netserver Agents to work, but does
need them to receive additional system I/O, disk array storage, predictive, and NIC events.