HP Toptools for Servers v5.0 Administrator Guide
Table Of Contents
- 1 Server Administration Using HP TopTools
- 2 Installing HP TopTools Auto Alert and Instant TopTools
- 3 Using HP TopTools Auto Alert and Instant TopTools
- A Customizing HP NetServer Agents and Instant TopTools Software
- B Warranty, Software License, and Support
- Index
Chapter 2 Installing HP TopTools
24
Verifying HP TopTools Auto Alert Installation
After Auto Alert is installed, you will see an "HP TopTools Auto Alert" icon on
the task bar. Clicking this icon will maximize the HP TopTools Auto Alert
program and will show you the following dialog box which you used when you
initially installed Auto Alert:
Figure 2-3. HP TopTools Auto Alert Server Status
When console setup is complete, Auto Alert launches automatically and starts
polling your HP NetServers. Under the SNMP Status column, check to be sure
that the each server has SNMP "UP". This means that the server is ready to send
you alerts.
If you need to reconfigure or add servers, click Configuration tab. Under the
Configuration tab, make sure that the Alert Destination shows the "SET" status to
be sure that each server is ready to send you alerts.