HP Server Agents silent installation procedure

netserver agents

silent install

application note

netserver agents silent installation and configuration

note: SNMP is required

download

1. Download the latest Netserver Agents (5.03 or later) from HP's website

2. Execute the self extracting executable

3. Run the setup.exe and add a node name to the servers list

add server

PAGE 1
netserver agents silent install application note netserver agents silent installation and configuration note: SNMP is required download add server 1. Download the latest Netserver Agents (5.03 or later) from HP's website 2. Execute the self extracting executable 3. Run the setup.
PAGE 2
application note disable agents 4. Select installation options and disable the Netserver Agents that will not to be installed 5. Click on “Save Config” and save the file as agents.cfg 6.
PAGE 3
application note 7. Copy the agents.cfg you saved in step 5 to %winnt%\hpserver directory 8. Copy nsantl.exe to the %winnt%\hpserver directory and execute it with the parameter “–ds” this will unpack the installation files Example: c:\winnt\hpserver\> nsantl.
PAGE 4
application note batch file 9. Run a batch file on each system that runs the command setup.exe -s in %winnt%\hpserver directory so the desired configuration is installed directly on each system. Sample batch file: REM copy the files (nsantl.exe and agents.cfg) to the host server REM under %winnt%\hpserver directory expand nsantl.exe nsantl.exe -ds REM silent install setup –s Technical information in this document is subject to change without notice. © Copyright Hewlett-Packard Company 2001.