- HP Laserjet Enterprise 500 MFP Manual

3. Clean the main scanner glass, the document-

feeder glass (the small strip of glass on the left

side of the scanner), and the white foam

backing. Use a soft cloth or sponge that has

been moistened with nonabrasive glass

cleaner. Dry the glass and white plastic

backing by using a chamois or a cellulose

sponge to prevent spotting.

CAUTION: Do not use abrasives, acetone,

benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the product; these

can damage the product. Do not place liquids

directly on the glass or platen. They might seep

and damage the product.

NOTE: If you are having trouble with streaks

on copies when you are using the document

feeder, be sure to clean the small strip of glass

on the left side of the scanner.

4. Connect the power cable to an outlet, and

then press the power button to turn on the

product.

Check the resolution settings

NOTE: Setting the resolution to a high value increases the file size and the scan time.

1. From the Home screen on the product control panel, scroll to and touch the Administration button.

2. Open the Scan/Digital Send Settings menu.

3. Select the category of scan and send settings that you want to configure.

4. Open the Default Job Options menu.

5. Touch the Resolution button.

6. Select one of the predefined options. Touch the OK button.

7. Touch the Start

button.

238 Chapter 10 Solve problems ENWW