SUSE Linux Enterprise Server 11 Support Pack 3 Support Notes for HP Integrity Servers HP Part Number: 5900-3154 Published: July 2013 Edition: 3
© Copyright 2012, 2013 Hewlett-Packard Development Company, L.P. Legal Notices Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents About This Document.....................................................................................4 Intended Audience....................................................................................................................4 Typographic Conventions...........................................................................................................4 Publishing History................................................................................................................
About This Document This document provides information specific to the installation and support of SUSE Linux Enterprise Server 11 SP3 on HP Integrity Servers. Intended Audience This document is intended for system administrators responsible for installing, configuring, and managing Linux. Administrators must have knowledge of operating system concepts, commands, and configuration. Knowledge of Extensible Firmware Interface (EFI) concepts is also helpful.
— The HP Insight Foundation Suite for Integrity with Linux website: http://www.hp.com/go/integritylinuxessentials — The HP Insight Foundation Suite for Integrity with Linux documentation website: http://docs.hp.com/en/ linuxredhat.html#HP%20Integrity%20Essentials%20Foundation%20Pack%20for%20Linux — The Intel® EFI website: http://developer.intel.com/technology/efi/ — The HP Systems Insight Manager website: http://www.hp.
HP Encourages Your Comments HP encourages your comments concerning this document. We are committed to providing documentation that meets your needs. Send any errors found, suggestions for improvement, or compliments to: docsfeedback@hp.com Include the document title, manufacturing part number, and any comment, error found, or suggestion for improvement you have concerning this document.
1 Support for SUSE Linux Enterprise Server 11 SP3 This support note provides the additional installation and support information for the use of SUSE Linux Enterprise Server (SLES) 11 SP3 on HP Integrity servers. This chapter provides the support and certification information related to SLES 11 SP3 on HP Integrity servers. SLES 11 Certification and Support Information HP has certified SLES 11 SP3 for the Intel Itanium Processor (glibc–2.11.3-17.54.1 and kernel-default-3.0.76-0.7.6) on HP Integrity servers.
2 Operating System Installation This chapter describes how to prepare your server for operating system (OS) installation, install the SLES SP3 11 OS on your HP Integrity server, and obtain OS updates directly from Novell. Installation Preparation Before you begin installing SLES 11 SP3 OS on your HP Integrity server, ensure that you have obtained: • All necessary installation documentation. • The SLES 11 SP3 for the Intel Itanium Processor installation media set.
Follow the instructions provided to download and use the SLES 11 SP3 ISO images for the 64-bit Intel Itanium architecture. To obtain the SLES 11 SP3 documentation, see the Novell Documentation website: http://www.novell.com/documentation/sles11/index.html Methods of Operating System Installation There are two methods that can be used to install SLES 11 SP3 on your HP Integrity server as follows. NOTE: Installation of SLES 11 SP3 on your HP Integrity server by the factory is not offered.
Registering the SLES 11 SP3 Software 1. Browse to the Novell Customer Center: http://www.novell.com/customercenter/ 2. 3. Log in to or create an account. Select My Products→Activate Product to enter your registration code and activate your SLES product. Obtaining Updates from Novell Updating your server is simple using Novell's openSUSE Updater, YaST, which is installed and configured by default.
3 Recommendations, Limitations, and Known Issues This chapter contains recommendations, limitations, and known issues with the use of SLES 11 SP3 on HP Integrity servers. Recommendations The following recommendations from HP for using SLES 11 SP3 on HP Integrity servers should be observed.
• PCI Express Active State Power Management support PCI Express Active State Power Management is not supported on HP Integrity servers. • Transfer of Control should not be used The Kernel Debugger (KDB) is included in SLES 11 SP3. When a Transfer of Control (TOC) is issued, instead of producing a dump the SLES 11 SP3 kernel enters the KDB. This process may cause issues so HP recommends that you do not use TOC.
Kernel • Avoid kernel dump errors on PCI Express servers The Kdump (kernel dump) feature of kexec can be used on PCI Express servers though PCI Express errors may occur. To avoid error messages, boot with the pci=noaer. Hardware • System panics occur if fibre channel storage arrays are directly connected System panics may occur on HP Integrity servers running Linux that have fibre channel storage arrays directly connected.
If the system was working previously, try the pdt command at the EFI prompt to locate any potential bad memory cells. If there are PDT entries, consider replacing the bad memory. • Enabling rx7640 or rx8640 servers to power off The normal behavior on rx7640 and rx8640 servers is for an nPartition to be made inactive (all cells are in a boot-is-blocked state) when shutdown -h or poweroff is issued from the SLES command line.
