Support Notes for Red Hat Enterprise Linux AS v.4 Update 3 for the Intel Itanium Processor on HP Integrity Servers

powered off. You can run the acpiconfig command with no arguments to check the current setting
and the softpowerdown setting; however, softpowerdown information is displayed only when different
from normal behavior.
To power on hardware that has been powered off, use the PE command at the management processor
command menu. To make an inactive nPartition active, use the management processor BO command
to boot the nPartition past the boot-is-blocked state.
20. This note pertains to Linux running on the following systems: rx8620 and Superdome. The maximum
number of I/O chassis that can be supported per hard partition (also called nPartition) is two.
21. In a text-based installation, the partition displays from either autopartion or disk druid will disply
filesystems of 1 terabyte or greater without a size suffix such as M or G. These filesystems will appear
to be much smaller than they really are.
Known Issues 9