HP Management Base Installation and User's Guide (May 2009)

F Sensor
Full sensor that can return analog readings
FRU
Field Replaceable Unit
Ent Assoc
Entity association, a logical grouping of lower-level entities
A Prop
Association property, an HP-proprietary type (cellular only)
D Prop
Data property, an HP-proprietary type (cellular only)
C Prop
Control property, an HP-proprietary type (cellular only)
SDRprintraw
Like SDRprint, along with the raw data bytes of the entry, starting at the Record
Type.
SELappend
Adds a new event to the System Event Log. The SEL has a finite length and when
full will not accept any new events. This directive may cause generate SNMP or
WBEM network activity if agents are running. The details of the arguments are
beyond the scope of this document, however the results of SELprintraw may
be "cut-and-pasted."
SELappendraw
Adds a new event to the System Event Log. The arguments are the raw 14 bytes
of an SEL body. One source of this is the bytes given by SELprintraw.
SELdecode
MP cards provide a login and command line interface to manage an Integrity
server. One of those commands lists the SEL contents. Those events are sometimes
listed (based on firmware revision or settings) as two large hexadecimal numbers
which need to be decoded. Use those numbers as the two arguments to the
SELdecode directive to get a better description of the event. It is best to run this
command on the same platform as that which generated the event; sometimes
additional SDRR data is needed for a full decode.
SELerase
Erase the entire System Event Log.
SELprint
Print a verbose list of all entries in the System Event Log. See the description under
FPLprint for more details.
SELprintraw
Like SELprint, along with the raw data bytes of the entry, starting at the Record
Type.
SELstatus
Print capacity, last entry time, last deletion time, and current time. The SEL is not
a circular log, and will not take more events when it is full. The HP IPMI daemon,
hpipmid monitors this condition and will erase the SEL as needed.
SELtail
Print the last entry in the SEL, then go into a two-second polling loop waiting for
new entries. Most useful with SELappend or truly buggy hardware :-)
24 HP Management Base Manpages