HP LeftHand SAN Solutions Support Document - Service Notes - VSA 7.0 for VMware ESX

27
Volume Not Added To Volume List Appears In iSCSI Initiator (4215)
Scenario
You create a cluster and configure the cluster to use iSNS. You then create a
volume but do not add the volume to a volume list. The volume appears as a
target in the iSCSI initiator. However, if you attempt to log on to this target,
you receive an Authorization Failure message. This is a function of
iSNS discovery.
Workaround
If you need to log on to the volume, add it to a volume list and create an
authentication group, as described in the user documentation.
Remote Copy
False Alerts May Be Generated While Remote Copy Is In Progress. (7681)
Scenario
During Remote Copy, alerts in the Management Console or via SNMP or email
alerts (if notification is configured) may give the impression that the Remote
Copy is not working properly.
Explanation
Ignore the “Status=incomplete” alert, this is a temporary state while the copy
is in progress. Wait until the Remote Copy is complete and you receive a
“complete alert”.
Remote Copy From Multiple Management Groups To A Single Remote
Management Group Causes Performance Drop In Remote Management
Group (3499)
Scenario
A remote management group experiences a performance drop if too much
bandwidth is used for transfer of Remote Copy data.