HP LeftHand SAN Solutions Support Document - Service Notes - VSA 7.0 for VMware ESX

26
Snapshot Schedules Do Not Adjust For Daylight Savings Time (4383, 4913)
Scenario
When snapshot schedules are created under Standard Time, the schedules
continue to execute at the originally scheduled Standard Time, even though
the storage modules are operating under Daylight Savings Time.
For example, if a schedule is configured, under Standard Time, to run at 2:00
PM, then the schedule initially runs at 2:00 P.M. Standard Time. When the
local time changes to Daylight Savings Time, the schedule starts running at
3:00 PM instead of 2:00 PM.
This happens because the schedule is operating as if Daylight Savings Time
doesn’t exist; so the schedule continues to execute at 2:00 PM Standard Time.
Explanation
The SAN/iQ software does not include automatic adjustment for Daylight
Savings Time.
Workaround
If you want snapshot schedules to operate at the same relative time all year,
you must manually edit the schedules when the time change in spring and
changes back in autumn.
“NVRAM Card = Corrupt” Alert Generated After RAID 0 Disk Replacement
[NSM 160, NSM 200] (4359)
Workaround
Reboot the storage module.
Hardware Information Report Does Not Report CPU Temperature [IBM
x3650] (5703)
Reading the hardware report, the status of the CPU temperature is “not
available.” This is due to a limitation in the IBM Baseboard Management
Controller (BMC) firmware.