HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

10
Plan the CMC Installation
Install the CMC on a Linux or Microsoft Windows OS. Then, use the CMC to
find virtual storage appliances, create storage, and connect to
application servers.
Installing the CMC
Install the CMC on the computer that you will use to administer the LeftHand
SAN. You administer the entire network of VSAs from the CMC.
Installing the CMC in Windows
1 Click the CMC installer.
The installation wizard opens and starts the installation process.
2 At the Choose Install Set window, select the configuration most
appropriate for your setup.
3 When the installation completes, LeftHand is added as a separate
Program Group and an icon is added to the Microsoft Windows desktop.
Installing the CMC in Linux
You must be running X Windows in order to run the application.
1 Click the CMC installer.
The installation wizard opens and starts the installation process.
2 At the Choose Install Set window, select the configuration most
appropriate for your setup.
3 When the installation completes, LeftHand is added as a separate
Program Group.
To start the CMC:
1 From the directory into which you installed the files, run the
script ./Console.