HP LeftHand SAN Solutions Support Document - Installation Manual - VSA 8.0 Quick Start - Demo Version

32 Chapter 2
This host name displays in the CMC. It does not change the name of the
original .vmx file, nor does it change the name in VMware.
6 Configure the IP Address
Using DHCP
a Tab to the choice Obtain IP address automatically using DHCP and
press Enter to select it.
b Tab to OK and press Enter.
A message opens, asking you to verify the request.
c Tab to OK and press Enter.
After a short pause, another message opens that displays the new IP
address. Record this IP address for later use.
Configure IP Address Manually
a Tab to the choice Use the Following IP Address and press Enter.
The IP Address, Netmask, and Gateway list opens for editing.
b Tab to each field and enter the appropriate information.
Gateway is a required field. If you do not have a gateway, enter 0.0.0.0.
7 Tab to OK and press Enter.
A confirmation message opens.
8 Press Enter.
The network interface is now configured (wait a few seconds). The
Available Network Devices window opens.
9 On the Available Network Devices window, tab to Back and press Enter to
return to the Configuration Interface menu, shown in Figure 15.