HP LeftHand SAN Solutions Support Document - Installation Manual - VSA 8.0 Quick Start - Demo Version

Chapter: Getting Started with the VSA for ESX Server 29
12 Click OK to close the Virtual Machine Properties window.
Verify Settings
13 Select the ESX Server in the inventory panel.
14 Click the Resource Allocation tab.
15 Verify the CPU and Memory reservations you just set.
Power On the VSA and Configure IP Address and Host Name
1 In the inventory panel, select the new VSA and power it on using the
Power On command on the information panel.
2 Click the Console Tab and wait for the VSA to boot.
3 When the VSA has finished booting, a log in prompt opens, shown
in Figure 10.
Figure 10 Logging in to the SAN/iQ Configuration Interface
4 Log in and use the SAN/iQ Configuration Interface to configure an IP
address and host name for the VSA.
Setting the IP Address
Note: The first boot of the VSA is longer than normal, since
VMware tools are installed during the first boot up.