.HP LeftHand P4000 Virtual SAN Appliance in an HP BladeSystem environment solution guide (AT459-96002, April 2009)

3. When the VSA has finished booting, a login prompt appears. See Figure 9.
Figure 9 Logging into the SAN/IQ Configuration Interface
4. Log in and use the SAN/iQ Configuration Interface to configure an IP address and host name
for the VSA.
Setting the IP address
Use the Configuration Interface to set IP addresses and host names for all the VSAs in your environment.
You can return to the Configuration Interface to find or change an IP address or host name.
Software installation30