8.5 HP StorageWorks P4000 VSA Installation and Configuration Guide (TA688-96017, September 2010)

4 Getting started with the P4000 SAN
Installing the CMC
Install the CMC on the computer or virtual machine that you use to administer the VSA. You administer
the entire network of VSAs from this CMC. The CMC installer is located in the directory where you
unzipped the VSA zip package. If you imported the VSA for ESX Server using the OVF package, you
must download the SAN/iQ Management SW DVD, which includes the CMC. Download the DVD
from the website:
www.hp.com/go/p4000downloads
Installing the CMC in Microsoft Windows
1. Start the Management Software installer.
2. At the Choose Install Set window, select the configuration most appropriate for your setup.
3. When the installation completes, HP LeftHand Networks is added as a separate Program Group
and a shortcut icon is added to the Microsoft Windows desktop.
To start the CMC, either:
• Double-click the icon on your desktop, or
• From the Start menu, select All Programs > HP LeftHand Networks > HP LeftHand Centralized
Management Console.
Installing the CMC in Linux
You must be running X Windows in order to run the application.
1. Click the CMC installer.
2. At the Choose Install Set window, select the configuration most appropriate for your setup.
3. When the installation completes, HP LeftHand Networks is added as a separate Program Group.
To start the CMC:
From the directory into which you installed the files, run the script ./Console.
P4000 VSA Installation and Configuration Guide 21