HP LeftHand SAN Solutions Support Document - Service Notes - VSA 7.0 for VMware ESX

Workaround

For 1-way CHAP, use the Initiator Secret from the Console Authentication

Group as the QLogic Target Secret.

For 2-way CHAP, first use the Initiator Secret from the Console

Authentication Group as the QLogic Target Secret. Next, add the Target

Secret from Console Authentication Group as the QLogic Initiator Secret.

Using QLogic HBA And Solaris 10, I/O Can Only Be Done On One

Volume (5269)

Explanation

The QLogic HBA is not supported with Solaris 10 and the HP LeftHand SAN.

Workaround

Use the Sun Solaris native iSCSI initiator.

SuSE 9 and SuSE Linux iSCSI: Version 4.0.1-88.26 Initiator Reports Incorrect

Driver State (5444)

Workaround

Use the iSCSI initiator provided with the SLES 9 distribution.

Storage Module Configuration Backup and Restore

Storage Module Post-Install Qualification Of Restored Module Stalls If

Restored Module Has Different IP Address Than That Of Original

Module (939)

Scenario

Back up a storage module configuration file (Unit-1). Unit-1 becomes

unavailable and you restore the backed up configuration of Unit-1 to a second

storage module on the network (Unit-2). Unit-2 has a different IP address

than the unavailable Unit-1. As part of the post-install qualification, the

Console searches for the newly configured Unit-2 on the network. However, it

is searching for the original IP address of Unit-2 instead of the IP address that