HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

Figure 21Navigation window and the VSA RAID Setup tab

Configuring Monitoring and Network

Use the rest of the configuration categories to change settings for the following

features:

• Alerts and monitoring

• SNMP traps

• Network settings such as NIC bonding.

Warning: If you have trouble configuring RAID now, you may have

made a mistake when configuring a virtual disk earlier.

On the ESX Server, verify that the VSA has a virtual disk

configured on SCSI 1:0.

VSAs use SCSI 0:0 and 0:1 for operating system disks, and use the

disk configured for SCSI 1:0 for SAN data storage. If no SCSI disk

is configured for SCSI 1:0, RAID cannot be configured on the

appliance.

RAID is Normal