HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

31
Figure 13 Selecting an interface to configure
4 Tab to the network interface and press Enter.
The Network Settings window opens, shown in Figure 14.
The cursor should be in the Hostname field. Tab to the field if necessary.
Figure 14 Setting the host name
5 Press Backspace in the Hostname field to delete the default name and
type your own host name.
This host name displays in the CMC. It does not change the name of the
original .vmx file, nor does it change the name in VMware.
6 Configure the IP Address