HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

30
4 Log in and use the SAN/iQ Configuration Interface to configure an IP
address and host name for the VSA.
Setting the IP Address
Use the Configuration Interface to set IP addresses and host names for all
the VSAs in your environment. You can return to the Configuration
Interface to find or change an IP address or host name.
1 Type Start and press Enter.
The Configuration Interface window opens, shown in Figure 11.
Figure 11Logging in to the Configuration Interface
2 Press Enter to log in.
The Configuration Interface main menu opens, shown in Figure 12.
Figure 12 Configuration Interface main menu
3 Tab to Network TCP/IP Settings and press Enter.
The Available Network Devices window opens, shown in Figure 13.