HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

20
Documentation Available
For detailed instructions about using the Centralized Management Console
and the VSA, see the following resources.
If the wizard freezes, reset
the Hardware Acceleration in
Windows.
1 Go to Windows Properties > Settings >
Advanced > Troubleshooting.
2 Move the Hardware Acceleration slider to
one notch above None.
3 Click OK, and then OK again to leave the
Properties dialog.
4 Restart the installation wizard.
In Linux
If the installer does not start
automatically
Run CMC_Installer.bin again
In VMware
You don’t have your cursor
available, or you don’t have
your keyboard available.
• If your cursor is missing, you are in
console mode. Press Ctrl-Alt.
• If your keyboard is missing, move the
mouse to the console window and click
once.
You want to see your VSA,
but the window is black.
• You are in the console view of the guest
window. Change to the Summary view.
• Your console window has timed out. Click
in the window with the mouse and then
press the Backspace key.
Table 1 Troubleshooting Installation
Trouble Solution