HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

13
Figure 3Configuration Interface main menu
2 Tab to Network TCP/IP Settings and press Enter.
The Available Network Devices window opens, shown in Figure 4
Figure 4Selecting an interface to configure
3 Tab to the network interface and press Enter.
The Network Settings window opens, shown in Figure 5
4 Tab to the Hostname field and type a host name for the VSA. This
hostname displays in the CMC. This does not change the name of the
original .VMX file, nor does it change the name in VMware.