HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

12
6 Start the virtual machine.
NOTE: The first boot of the VSA will be longer than usual since VMware
tools are installed during the first boot up.
7 The Welcome to SAN/iQ window opens, shown in Figure 1
Figure 1Logging in to the Configuration Interface
Using the Configuration Interface
Use the Configuration Interface to set IP addresses and host names on VSAs
configured in your environment.
1 Type Start, and press Enter to log in.
The Configuration Interface window opens, shown in Figure 2
Figure 2Logging in to the Configuration Interface
The Configuration Interface main menu opens, shown in Figure 3