HP LeftHand SAN Solutions Support Document - Installation Manual - VSA 8.0 Quick Start - ESX Version

42 Chapter 2
Table 3 Troubleshooting Installation
Trouble Solution
You want to reinstall the VSA
1 Close your CMC session.
2 In the VI Client, power off the
VSA.
3 Right-click and select Delete from
Disk.
4 Copy fresh files into the virtual
machine folder from the
downloaded zip file or distribution
media.
5 Open VMware and begin again.
You cannot find the VSA with the
Centralized Management Console,
and cannot recall its IP address.
CMC windows display the IP address
of a machine if the machine can
be found.
Open a VI Client session and select
the Summary tab for the machine
you want. The IP address and DNS
name are displayed in the General
information section.
You can’t configure RAID. Verify that the VSA has a virtual
disk configured on SCSI 1:0. VSAs
use SCSI 0:0 and 0:1 for operating
system disks. They use the disk
configured for SCSI 1:0 for SAN data
storage. If no SCSI disk is configured
for SCSI 1:0 then RAID cannot be
configured on the appliance.
In Windows