HP LeftHand SAN Solutions Support Document - Installation Manual - VSA 8.0 Quick Start - Demo Version

Chapter: Getting Started with the VSA for ESX Server 39
Figure 20 Configuring virtual RAID
3 Choose Configure RAID.
The Configure RAID window opens.
4 Select RAID (virtual) from the list and click OK.
Note that the RAID status now shows normal, as shown in Figure 21.
Warning: If you have trouble configuring RAID now, you may have
made a mistake when configuring a virtual disk earlier.
On the ESX Server, verify that the VSA has a virtual disk
configured on SCSI 1:0.
VSAs use SCSI 0:0 and 0:1 for operating system disks, and use the
disk configured for SCSI 1:0 for SAN data storage. If no SCSI disk
is configured for SCSI 1:0, RAID cannot be configured on
the appliance.