HP LD4730 and LD4730G LCD Ultraslim Bezel Digital Signage Displays Command Reference Guide
[Data5] 00H to 3BH, FFH (Minutes)
When you read/delete the current off time list, all of [Data2][Data3][Data4][Data5]
have to be FFH
ex1: fd 01 F1 FF FF FF FF - when you read 1st index of Off Time List
ex2: fd 01 E1 FF FF FF FF - when you delete 1st index of Off Time List
ex3: fd 01 F1 3F 01 02 03 - when you write 1st index of Off Time Data, "Monday to
Saturday every week, 02:03"
Acknowledgement
[e][][Set ID][][OK][Data1][Data2][Data3][Data4][Data5][x]
38. Scheduling Input select (Command: f u) (Main Picture Input)
To select input source for scheduled On times.
Transmission
[f][u][][Set ID][][Data1][][Data2][Cr]
[Data1] F1h to F7h(write/read one index)
F1: read 1st index of On Time Input
F2: read 2nd index of On Time Input
F3: read 3rd index of On Time Input
F4: read 4th index of On Time Input
Data (Hex) INPUT
[Data2] 07H VGA
09H Ethernet
0BH DisplayPort (PC)
When you read/delete the current On Time Input, [Data2] needs to be 0xFF.
ex1: fu 01 F1 FF- when you read 1st index of On Time Input
ex2: fu 01 F3 07- when you write one On Time Input Data in to 3rd index, "RGB"
Acknowledgement
ENWW Transmission/Receiving Protocol 23