HP LaserJet P2050 Series - Software Technical Reference

IPv4 Configuration
The IPv4 Configuration screen shows the settings for IPv4 network configuration. After changing these
settings, click Apply to save the changes. The product is restarted after the settings are changed.
Figure 2-25 IPv4 Configuration screen
The IPv4 Configuration screen shows the product host name and domain. By default, the product uses
automatic IP configuration. Use this screen to configure the IP address manually.
The following IP Address Configuration options are available:
●
Automatic IP. This option is selected by default. It causes the product to obtain a TCP/IP address
from a Dynamic Host Configuration Protocol (DHCP) server, BOOTP server, or AUTOIP.
●
Manual IP. Select Manual IP to manually specify an Internet Protocol (IP) address (also known as
a static IP address). If you select this option, specify an IP address in the IP address, Subnet
mask, Default gateway, and WINS server fields.
NOTE: Click Apply to make the changes take effect.
44 Chapter 2 Windows software description ENWW